info@blueiceindia.com

Cold Room Puf Panel


Technical Specifications of PUF Panels

  • THICKNESS :   60,80, 100,125 & 150 mm
  • SURFACE MATERIAL   Gl Pre-Painted Sheet, S.S. Sheet (Grade 304/316), Gl Plain Sheet, Galvanium. (Inside & Outside different metal can be placed as per your requirement).


  • FLOOR :
  • (A)  For Kota stone or Concrete floor, Puf Slab with both side tar felt coated.
    (B)  For Kota stone or Concrete floor, both side metal surface panel in which each side fits with cam lock and prevent temperature loss.
    (C)  Aluminium Chequered Plate with Marine Ply.


  • DOOR :
  • (A) Flush Type :   Swing Door with FRP Profile, Imported Hardware, Push Type Gasket & replaceable heater for easy door operation & long life.
    Size :  30"x72",34"x78",46"x84" (Door Opening W x H)
    (A) Over Lap Type:   Teak wood frame with metal covering by using heavy duty hardware for better strength
    Size :   45"x84",49"x84",54"x84" (Door Opening W x H)


  • Hatch DOOR / WINDOW :
  • Overlap type window with heavy frame
    Size : 20"x20",24"x24


  • CORNER :
  • The corner panel ensures that the Cold Room has a 90 corner which provides stability to the Cold Room. The foamed-in design eliminates thermal loss and avoids bacteria breeding.


  • Imported Hardware :
  • All Hinges and the Handel are heavy duty cast alloys, and brushed-chrome finish for that special look.


Sr. No.

Parameters

Description

1

Average PUF Density

40 ± 2 Kg/ cu.mtr/ m³

2

PUF Blowing Agent

141B (CFC free)

3

Insulation Material

Polyurethane foam

4

Temperature range

+90°C to -60°C

5

Penal Type

Discontinuous type with cam lock

6

M.O.C. Of Cam Locks

Cam locks body material HIPS and male latch is made of nylon Glass field with GI sheet reinforcement. Cam-lock panel joints easy assembly and leakage resistant, panel-to-panel joints.

7

Type Of Panel Joints

Tongue & Groove Joint with Cam lock and all side rubber gaskets

8

Corner Panel Available

12” X 12” X 132”

9

Ceiling Suspension items with specs

MS bolt with thermal breaking cap. 4 mm thickness X 80 X 80 mm Aluminum/MS washer plate for load distribution Anchor bolt (MS) hanging bolt with 40 mm washer 2.0 mm thickness Sealing to panel MS road Clamp with an insulated crown.

10

Closed cell content

90 to 95%

11

Vapour Permeability

5.5mg/PASM

12

Water Absorption

Less than 2%

13

Fire Resistance

FR Grade (Fire Resistance Grade)

14

Compressive Strength at 10% Deformation

0.21 N/ sq.mm (For PUF only)

15

Tensile Strength

0.58 N/ sq.mm (For PUF only)

16

Bending Strength

10mm (For PUF only)

17

Adhesive Strength (Foam to Sheet)

2.9 kg /sq.mtr

18

Dimension Stability

Less than 2%

19

Panel Facing Availability

With Rib or plain on Demand (Ribs are provided for more strength)

20

Wall & Ceiling Panel Facing Material

Pre Painted Galvanized sheet, Thickness 0.5 mm Plain Galvanized sheet, Thickness 0.55mm S.S.Sheet, Grade 316, 0.50mm, finish 2B, mates. S.S.Sheet, Grade 304, 0.50mm, finish 2B, mates.

21

Floor Panel Facing Material

Puf panel with both side GIPP sheet of 0.5 mm with Plywood with 2.00mm thickness Aluminum Checkered Plate.

22

Fire Grade of Polyurethane foam

B2